Mini•Dub Overview

Mini•Dub DIY Fightstick Case
ReleaseFebruary 1, 2024
CompatibilityPS5 / PS4 / PS3 / XSX / XB1 / NS / WU / PC
Dimensions10.8” x 6.3” x 2.1”
Weight3 lbs


With the tagline of “small W’s fuel greatness”, the Mini Dub is a smaller version of the 4TW by jonyfraze. The primary difference is probably that the edges of the top panel are mostly straight.

Layouts include 6gawd joystick and 6gawd all-button ones. As for the name of the case, it likely refers to the letter W, which is featured in 4TW (or “for the win”).

The Mini Dub is an acrylic case (with assembly and mounting hardware), so you would have to acquire the other parts yourself. Wiring the Mini Dub would require expert skills. The same applies to cable management and modding. That is due to the small size of the case. When fully assembled, you can expect your Mini Dub to weigh three pounds.

Your industry-standard parts from Sanwa to Neutrik can fit the Mini Dub. Foam bottom cushions are sold separately. There are three button holes on the right side panel.

Speaking of panels, the Mini Dub’s panel art can be customizable, and we at The Arcade Stick offer a custom art service. In fact, check out one of our artists’ work for the 4TW. This was done by our Carlos Martinez:

Nazuna Nanakusa artwork
Top panel
Nazuna Nanakusa artwork
Bottom panel
Nazuna Nanakusa artwork
Back panel

See Also


4TW Fightstick Full Build